Product Description

DIN 1x2 ISOD A4-P1-O1-O1 Single Input Dual Output 4-20mA Signal Splitters/Replicators

Specification:

• Single input: 4-20mA
• Dual output: 4-20mA
• Power supply: 16~28V
• Isolation voltage: 3KVDC
• Package type: DIN rail mounted
  
  

Features:

• Special use one 4-20mA input, two 4-20mA output isolation and distribution technology 
• Adopt Low cost solution of two channels output of the same specifications 4-20mA signals
• Product accuracy level: 0.1 level, 0.2 level, 0.5 level
• Non-linearity in full range<0.2% , no need for zero and gain adjustment
•  3000VDC four isolation between signal input / output 1 / output 2 / auxiliary power 
• Auxiliary power: 16 ~ 28VDC single power wide range power supply  
• Industrial temperature range: -40 ~ + 85
• The product has been checked and calibrated before leaving the factory, and users can use it directly without adjustment.
  
  

Applications:

• The display monitoring and transmission of Sensor signal
• Signal isolation in industrial scene,conversion amplification,long-line transmission.
• Ground wire interference suppression for 4-20mA loop signal 1-input&2-output.  
• Ground signal interference suppression and data isolation and acquisition of analog signals
• Power monitoring, medical equipment isolation monitoring safety barrier
• Instrumentation and sensor signal multiplexing detection
• Process control system 4-20mA signal isolation and transmission
• Simultaneous monitoring and transmission of analog and digital signals in industrial field
  
  

Introduction:

SunYuan DIN 1X2 ISOD series 4-20mA signal 1-input&2-output isolation distributor is an analog 4-20mA current loop signal that outputs industrial field instruments and sensors, PLC / DCS, etc., It is divided into two standard 4-20mA signal distribution modules with precision, linearity and impedance matching after isolation. The internal module integrates the analog signal isolation amplifier circuit of two high isolation,Adopt low cost solution for magnetoelectric coupling, It is mainly used where no special requirements of EMC (electromagnetic interference). The input and output of the product and the wide creepage distance between the channels and internal isolation measures make the module meet the 3000VDC four isolation between signal input / output 1 / output 2 and auxiliary power.

DIN 1X2 ISOD series 4-20mA signal 1-input&2-output isolation distributor is very convenient to use, no need for zero and gain adjustment.Product adopts standard DIN 35 rail-mounted card slot packaging way. It can realize the isolation, distribution, and amplification of 4-20mA current signals such as various sensors, instruments, and PLCs in the industrial field.And can meet the requirements of industrial-grade wide temperature, humidity, vibration and other harsh working environments.