Product Description

Loop Powered PWM to 4-20mA Isolated Signal Converters

Specification:

• Input: 10Hz-99Hz, 100Hz-0.9KHz, 1KHz-9KHz, 10KHz-19KHz, 20KHz-50KHz
• Output: 4-20mA
• Power supply: Loop powered
• Isolation voltage: 3KVDC
• Package type: PCB mounted, DIN rail mounted
  
  

Features:

• Unique loop-powered technique used, external power supply  is not required.
•  PWM pulse width signal input, 4-20mA loop powered output type.
• 10Hz--50kHz PWM signal input, high sensitivity, fast response.
• High linearity in full measuring range, non-linearity<0.2%
• 3kV isolation between input and output.
• Extra small size 22x11x9mm, error grade: 0.1, 0.2, 0.5
• SIP 8-Pin PCB-mounting, UL94V-O flame-retardant package.
• High anti-interference ability on EMC magnetic interference or  high frequency signal.
• Industrial operating temperature range: -40 to +85Cel. deg.
  
  

Applications:

• PMW signal long-distance transmission, isolated conversion.
•  PLC and Inverter control in industrial site.
•  Signal Ground wire anti-interference.
•  Boiler temperature automatic control.
• DA Converter designed on the basis of PWM.
• Processing control and automatic equipment
• PWM to 2-wire 4-20mA signal isolated control, 1-channel input 1-channel output or 2-in 2-out isolated conversion.
  
  

Introduction:

SunYuan ISO D-O1 is an micro-size low power consumption passive integrated transmitter IC designed for the isolated conversion from PWM pulse width signal into 2-wire 4-20mA signal. That IC operates in current loop powered in output terminal mode, it receives PMM signal from input, and converts it into corresponding isolated 4-20mA standard 2-wire current signal in linearity.

SunYuan ISO D-O1 series PWM Pulse width transmitter is a kind of integrated mixed circuits which can convert the duty ratio of PWM signal into isolated standard current signal. The transmitter IC is in low cost, small size standard SIP 8Pin flame-retardant package. It has combined with the following circuits: signal coupling isolated conversion circuit, precision reference voltage source switching control circuit, low-pass filtering circuit, driving and amplification circuit, VI conversion circuit, etc. The output loop powered power supply range is 12-36VDC, PWM signal is converted in high accuracy and linearity. The hybrid integrated circuit and isolated technique used enable that transmitter IC to operate in 3KV isolation between input and output and operate normally in the severe operating environment, like high/low temperature, humidity, shake, etc in industrial site.

SunYuan ISO D-O1 is designed by using high speed optically coupled isolation mode and high efficiency feedback loop powered technique to achieve the isolated conversion from PWM signal to 4-20mA standard signal. It can be well matched with the input interface of various types of meters and instruments like PLC, DCS, FCS, etc. Operating in loop powered mode and extra small size (22.0X11.0X9.0mm) can effectively simplify users system layout and save the space and cost in designing an application solution. The transmitter has 35mm DIN Rail-mounting package and PIM embedded board with display type. For 35mm rail-mounting type, it has single input, single output, dual input-output, triple input-output type. PIM embedded board with display type  can realize sensor signal isolation and display, alarm control, long-distance transmission without distortion. It is  widely applied to electric power system, telecom, instrumentations & measurements, medical equipments, industrial intelligent control, automotive electronics, security-monitoring system, military industry, etc.

Click below link to check the data sheet:

https://drive.google.com/file/d/1eSwlCWV9pd_BPWvgj31RDzUIIQHseTJx/view