ISOEM U(A)-P-O Series Universal Input Current/Voltage Output Isolated Signal Converters
1. Input: 0-5V, 0-10V, 0-75mV, 0-2.5V, 0- ±5V, 0- ±10V, 0- ±100mV, 0-1mA, 0-10mA, 0-20mA, 4-20mA, 0- ±1mA, 0- ±10mA, 0- ±20mA
2. Output: 4-20mA, 0-20mA, 0-5V, 0-10V, 1-5V, 0- ±5V, -20-20mA, 0- ±10V
3. Power supply: 24V/12V/15V/5VDC
4. Isolation voltage: 3KVDC
5. Package type: PCB mounted, DIN rail mounted
1. Low cost, small size, SIP 12Pin, anti- fire UL94V-0 package
2. External components, "ZERO" "G.adj" adjustment are not required
3. Three-port (power/input/output) isolation: 3000VDC
4. Auxiliary power supply: 5VDC/12VDC/15VDC/24VDC
5. 0-75mV/0-2.5V/0-5V/0-10V/0- ±100mV/0- ±5V/0- ±10V voltage signal 0-10mA/0-20mA/4-20mA/0- ±10mA/0- ±20mA current signal isolation and amplification.
6. Temperature range: -45 to +85 degree
7. In EMC (electromagnetism interference) circumstance, need to take shielding measures.
1. DC current/voltage signal isolated/transfer/amplifier
2. No distortion in long distance signal transmission
3. Analog signal data acquisition
4. 4-20mA(0-20mA)/0-5V signal isolation and transfer
5. Equipment and sensor signal acquisition
6. Signal isolated transmission and conversion
7. Electric power, distant control, isolated safe bar
8. 4-20mA sensor analog signal transmission
9. Ground interference control
SUNYUAN ISOEM series is a kind of electromagnetic isolation integrated IC, it is made of isolated DC/DC converters and electromagnetic isolation signal amplifier, it is ideally applied in the field with no special requirements on EMC(electromagnetism disturb). Compared to photoelectric isolation converter, it cannot be used in strong magnetic field, so clients need to adopt shielding measures, it can reach 5000VDC insulated. Sunyuan ISO EM series it is very easy to use,no external components are required. Products package: PCB Mounted type and DIN 35 1x2 or DIN35 2x2 Rail-Mounted. 0-5V/0-10V/0-75mV/0-2.5V/0-1mA/0-10mA/0-20mA/4-20mAisolated signal of international standard signal input and output.
Accuracy grade:0.1/0.2,Extremely high linearity in whole process(non-linearity<2%), need not "ZERO"and "G.adj" adjustment.