ISOEM U(A)-P-O-SD Span Zero And Gain Adjustable Analog Signal Isolation Distributors
- Input: 0-5V, 0-10V, 0-75mV, 0-2.5V, 0-ÃÂ±5V, 0-ÃÂ±10V, 0-ÃÂ±100mV, 0-10mV, 0-20mV, 0-30mV, 0-50mV, 0-1mA, 0-10mA, 0-20mA, 4-20mA, 0-ÃÂ±1mA, 0-ÃÂ±10mA, 0-ÃÂ±20mA
- Output: 4-20mA, 0-20mA, 0-5V, 0-10V, 1-5V, 0-ÃÂ±5V, -20-20mA, 0-ÃÂ±10V
- Power supply: 24V/12V/15V/5VDC
- Distribution power: 9V/15V/24V/5VDC
- Span, zero&gain adjustbale
- Isolation voltage: 3KVDC
- Package type: PCB mounted, DIN rail mounted
- Zero, Gain, Full scale calibration are available through external multi-turn potentiometer.
- Power distribution in input end for function expansion: 5V,12V,15VDC
- Isolated amplification and conversion on analog signals: 0-75mV/0-10V/0-1mA/4-20mA
- Precision grade0.1, 0.2; nonlinearity grade (in full measuring range) <0.2%.
- Isolation power among auxiliary power, analog input, output: 3KVDCÃâ
- Auxiliary power: 5V,12V,15V,24VDC,etc single power.
- Electro-magnetic anti-interference circuits /shielding measures are required in the field with special EMC
- Low cost, compact DIP 24Pin, UL94V-0 standard flame retardant package.
- Industrial Temperature range: -20 to +70 degree
- Isolated power distribution for passive sensors and signals acquisition and transmission.
- Distribute power for pre-amplification, electric bridge and other circuits to collect signals.
- Isolated data acquisition of analog signals from PLC, DCS.
- Analog signal GND wire anti-interference and data isolated acquisition.
- DC current/voltage signal isolation, conversion and amplification.
- Long-distance isolated transmission of industrial site signals.
- Meters, instruments and sensors signal acquisition and transmission.
- Power monitoring control, medical equipments isolated safety bar.
SunYuan DIP24PIN ISO EM-1001 Series Analog Active Signal Isolation Transmitter is a kind of modules with hybrid integrated circuit inside which generates the signals with according matchable precision and linearity after the isolation, amplification, distribution, conversion process to the analog signals between sensors and PLC, instruments. In the IC, there are one multi-isolation DC/DC transforming power and a set of electric-coupling analog signal isolated transmitter. ISO EM-SD Series Magneto-electric Transmitter is mainly applied in the field where there is no special requirements on EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side cree-page distance, the isolated voltage of signal transmitter is up to 3000VDC.
SunYuan ISO EM-SD Series Isolation Transmitter usually applied in the fields or equipments where there requires the adjustment on Full Scale and Zero, the calibration on Zero and Gain and high precision and reference comparison. The isolated power supplied by isolation transmitter in analog input end can distribute power to displacement resistance, angular transducer, speed sensor and other two-wire or four-wire passive sensors, it also can be used as the reference power supply for bridge circuits, differential amplification circuits, pre-amplification of input end.
Data sheet: https://drive.google.com/file/d/1I0452Fhvj_sDXH4TNCOpHIwtXhfnZ8p4/view