ISO EM U(A)-P-O-S Current or Voltage Signal Isolation Converters and Distributors
- Input: 0-5V, 0-10V, 0-75mV, 0-2.5V, 0-±5V, 0-±10V, 0-±100mV, 0-1mA, 0-10mA, 0-20mA, 4-20mA, 0-±1mA, 0-±10mA, 0-±20mA
- Output: 4-20mA, 0-20mA, 0-5V, 0-10V, 1-5V, 0-±5V, -20-20mA, 0-Ãâ±10V
- Power supply: 24V/12V/15V/5VDC
- Distribution power: 9V/15V/24V/5VDC
- Isolation voltage: 3KVDC
- Package type: PCB mounted, DIN rail mounted
- Compact SIP 12Pin, comply with UL94V-0 standard, flame retardant package.
- External potentiometer, zero and gain adjustment is not required (Non-linearity <0.1%).
- 3KVDC Isolation among auxiliary power supply, signal input, output.
- Auxiliary Power Supply: 5V, 12V, 15V, 24VDC, etc single power supply.
- Power distribution in input end for function expansion: 5V, 12V, 15V, 24VDC, etc.
- 0-75mV/0-10V/0-1mA/4-20mA, etc analog signal isolation amplification and conversion.
- Industrial operating temperature range: -40 to +85 degree
- Passive sensor isolated power distribution, signal acquisition & transmission.
- Supply power for preamplifier, weighing bridge to collect signals.
- PLC, DCS analog signal isolation and data acquisition.
- DC current/voltage signal isolation, amplification and conversion.
- Analog signal ground interference rejection and data isolated acquisition.
- Industrial site signal isolation and long-distance transmission.
- Receiving and Transmitting the signals between meters& Instruments and sensors.
- Electric monitoring, medical equipments isolated safety bar.
SUNYUAN SIP12 Pin package ISOEM-S Series Analog Active Signal Isolated Transmitter/Distributor is a kind of signal module/ IC with electro-magnetic hybrid integrated circuit inside. There are one multi-isolation DC/DC transformation power and a set of electro-magnetic coupling analog signal isolated amplifier/transmitter in the IC. The transmitters mainly applied in the field without special requirements for EMC (electro-magnetic interference). And by employing internal isolation technique, proper I/O side creepage distance, the isolated voltage of that signal transmitter is up to 3000VDC.
ISO EM-S Series transmitter easily achieves the isolated conversion for the industrial site signals without gain/zero adjustment, external zero and without external gain adjustment potentiometers. The isolated power supply in input end can distribute power to displacement, resistance and other passive two-wire/three-wire sensors, and can also be used as pre-amplification in input end, amplification of weighing bridge, calibration,etc.
- Precision grade: 0.1, 0.2.
- 0-5V/0-10V/0-75mV/0-2.5V/0-1mA/0-10mA/0-20mA/4-20mA,etc international standard signal input.
- Output voltage signal: 0-2.5V/0-5V/0-10V/1-5V. Output current signal: 0-10mA/0-20mA/4-20mA, high load capacity.