DIN1x1 ISO L-(U)-P-O High Current Output Analog Signal Isolation Converters
- Input: 0-5V, 0-10V, 0-75mV, 0-2.5V, 0-1mA, 0-10mA, 0-20mA, 4-20mA
- Output: 0-5V (max 500mA), 0-10V (max 200mA), 1-5V (max 500mA), 0-1A (max 2 Ohm), 0-500mA (max 10 Ohm)
- Power supply: 24V/12V/15V/5VDC
- Isolation voltage: 3KVDC
- Package type: DIN rail mounted
- Accuracy linearity error grade:0.1,0.2,0.5.
- 4-20mA/0-5V/0-10V standard signal input.
- 0~100mA/0~500mA/0~1A current signal output.
- 0~1V(max 1A)/0~5V(max 500mA) voltage signal output.
- Signal input/output 3000VDC isolation.
- Auxiliary power supply:12V,15V,24V single power supply.
- No isolation between auxiliary power supply and output signal
- Standard DIN rail, industrial temperature range: - 45 to + 85 degree
- Industrial field signal isolation and amplification
- Amplify current signal or enhance voltage signal drive capability.
- Solenoid valve drive, solenoid switch controller
- Drive coil or high-power load.
- Ground interference restraint.
- PID Servo drive control
SUNYUAN isolation transmitter of large current type is combined of high-precision isolated amplifier circuit and a group of amplification circuit. It is mainly applied to the occasion that has high standard on the drive capacity of current signal or voltage signal; it could also be used to drive solenoid valve, solenoid switch or high-power load. This product, set by standard DIN35 rail, has low cost, convenient operating and high reliability. Sunyuan isolation amplifier has wide application in the field of industrial control, auto equipment and building automatic control.